MAXI CUTTING MACHINE

From Kerf Developments

Waterjet Cutting Machine

MAXI

Cutting Machines

The Maxi profile cutting machine is designed specifically for large cutting applications. It features a portal frame constructed from a mild steel fabricated design.

The maxi machine is driven through twin side rack and pinion drives by servo motors and planetary gearboxes under the control of a high performance CNC system. The operators panel can offer the automatic selection of Hi-Lo preheat, automatic piercing, cutting torch selection, and speed adjustment.

"
Large format heavy duty machines, available with cutting widths from two metres through to five metres wide, and with machine lengths designed for your specific application.
Material Thickness
3mm To 500mm
Table Size
3500mm To 5000mm Wide
Supported Materials
Mild Steel
Supported Cutting Technology
Oxy-Fuel

MAXI CUTTING

See it in action

CUTTING APPLICATIONS

 

The Maxi profile cutting machine incorporates features to set this innovative machine apart from others. With unrivalled quality levels on every feature of the machine, the Maxi profile cutter delivers a smooth running, low resonance and precision machine frame that can accommodate a wide range of cutting heads. With fabricated steel crossbeam, this stress-relieved and precision machined bridge has a strong, heavy duty structure that is up to the task for high speed plasma and gas cutting applications.

Running on high precision linear rails and bearing assemblies that run the full length of the machine, the crossbeam guarantees unsurpassed accuracy when cutting. Accuracy is further enhanced with twin synchronised AC Servo motors and planetary gearboxes. The accuracy is given on a machine that offers cutting widths of 3.5, 4, 4.5 and 5m with bed lengths that can be bespoke to each individual application to suit single sheet or pendulum loading to maximise productivity.

OPTIMA WATERJET
Benefits

  • Works around the clock, 7 days a week
  • Perfect for large industrial applications with maximum bed width
  • Reliable, with great aftersales support
  • Proven track record
  • Supports a variety of cutting technologies

GET IN TOUCH TODAY

Our sales and support teams are at the other end of the line to answer any questions you may have about any of our cutting machines, or consumables.

oxy-Fuel

Cutting Machines

When it comes to an excellent cutting method that has been used for decades and shows no sign of being any less popular today, look for OXY-FUEL cutting machines.

For the best quality and the most precise cuts, OXY-FUEL profile cutting machines are certainly an excellent option to explore. At Kerf, your first choice for CNC cutting machine manufacturer, we can provide a wide range of different OXY-FUEL cutting machine options. Oxy-fuel cutting is a method that has been around for more than a century, dating back to 1907. However, it is still widely used today and is a critical component and technology in many sectors.

To cut metals, oxy-fuel cutting uses a mix of fuel gases and oxygen. A number of fuels may be used, with acetylene being the most popular. Speak to Kerf about our profile cutting machines to find out more.

Oxy Fuel Machines

ultrasharp

Cutting Machines

Choose from our rapid selection of high-definition plasma cutting machines, for high quality components. Process machines for cutting mild steel from 1mm to 50mm thickness.

Ultrasharp Machines

Plasma

Cutting Machines

When it comes to cutting, our plasma cutting machines are exceptional. Plasma cutters use plasma to cut metals like steel and aluminium.

Plasma cutters pass an electrical arc through gas (often compressed air), which converts into a plasma arc that is used to cut through the metal. The interaction of gases, high speeds, and a concentrated region of pressure results in electrically conductive ionised gas, commonly known as plasma. This technique is used on metals that cannot be cut with flame cutting equipment.

Compared to laser profile cutting which utilises fiber lasers and in which the laser beam does the heavy duty work for you, the plasma CNC machine is perhaps less accurate, but it is faster and can cut through heavier materials. That said, the fiber laser cutting machine certainly has as much a place in construction as the plasma cutting machine does, so don’t hesitate to ask us if you need one or both – or any other – cutting machine. We can help you no matter what cutting machine requirements you might have.

Plasma Machines

Waterjet

Cutting Machines

If you’re looking for improved cutting speed with an eco-friendly touch, the waterjet cutting machines from Kerf, your chosen CNC cutting machine manufacturer, are the right option for you.

Not only can this cutting method get through almost any material you ask it to, but it leaves you with little to no waste, and it is an extremely accurate profile cutting method. When it comes to choosing a cutting system that will offer you everything you need, waterjet cutting ticks all the boxes.

Waterjet cutting employs an abrasive grit carried by an ultra-high pressure stream of water. The abrasive grit cuts using a mechanical sawing motion and results in a smooth, precision cut surface created at high speed.

Waterjet is the most adaptable method since it can cut nearly any material; even carbon steel is no match for it. Materials that are extremely fragile, such as tempered glass and certain ceramics, are among the limitations, however. Waterjet cutting is an extremely accurate procedure. It features a tiny kerf width, which allows for the cutting of delicate curves and the production of high tolerance components.

Waterjet Machines
Kerf Logo Image